Standard Socket Chart

June 26, 2024 Post a Comment

Standard socket chart

Six Point Standard Sockets (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1)

What is the size chart for sockets?

3/8″ Drive	1/4″ Drive	1/2″ Drive
6mm	4.5mm	9mm
7mm	5mm	10mm
8mm	5.5mm	11mm
9mm	6mm	12mm

What are the standard SAE socket sizes?

The most commonly used and sold SAE sizes for wrenches and sockets are:

5/16″
3/8″
7/16″
1/2″
9/16″
5/8″
11/16″
3/4″

What is a standard socket set?

A typical professional grade socket set in a metal box. It contains two ratcheting socket wrenches ( 1⁄4-inch and 1⁄2-inch), various extensions for each of the wrenches, an assortment of sockets for each wrench, and a variety of bits fitting on the smaller wrench for different types of screws.

Are 3/4 and 19mm the same?

19mm = 3/4 inch. 20mm = 25/32 inch. 21mm = just over 13/16 inch. 22mm = almost 7/8 inch.

Are 12 point sockets better?

The additional points make these sockets easier to connect with the heads of fasteners. This is ideal if you are trying to work on a fastener that is hard to see or you cannot see at all. 12 point sockets are also great for use in tight spaces as they allow you to connect to a fastener at more angles.

What are the 3 common sizes of ratchets?

Available with different drive sizes — 1/4 inch, 1/2 inch and 3/8 inch — to operate different size sockets. Most operate with a geared drive; those with a higher tooth count let you operate the tool with a smaller swinging motion, which is useful when there's little room to move the handle.

How do I know what size socket I have?

It's important to note that socket sizes are actually given in two measurements, namely: The size of the drive socket (the part that attaches to the socket wrench). These are always given in imperial measurements, and will usually be either 1/4", 3/8", 1/2", 3/4" or 1".

What is the most common ratchet drive size?

Types of Ratchets The most common ratchet sizes are ¼ inch drive, 3/8 inch drive, and ½ inch drive. There are also larger ratchet sizes including ¾ inch drive and 1-inch drive available. Most ratchets used with sockets contain a gear mechanism that is designed to allow for rotation in one direction only.

What does SAE socket stand for?

SAE sockets: Society of Automotive Engineers (SAE) sockets are manufactured for work on American-made vehicles. Socket sizes are measured based on imperial system inches and fractions. Some of the commonly used SAE sizes are 3/8 in., 5/8 in., and 11/16 in. sockets.

Does SAE mean standard?

SAE, or standard, is used on most domestic models, while metric applies to foreign or non-domestic vehicles. Socket sets and wrench sets are among the most used tools in cases where size measuring differences are important. Notably, SAE tools are measured in fractions of inches, from 5/32 to 2 ½ inches.

What does SAE stand for measurement?

Today, measuring in feet and inches is part of the Standard American English (SAE) or Imperial units of measurement, along with volumes like gallons and fluid ounces and weights like pounds. It's standard in the United States and two other countries in the world.

What are the 3 types of sockets?

Three types of sockets are supported:

Stream sockets allow processes to communicate using TCP. A stream socket provides bidirectional, reliable, sequenced, and unduplicated flow of data with no record boundaries.
Datagram sockets allow processes to use UDP to communicate. ...
Raw sockets provide access to ICMP.

What sockets do mechanics use?

⅜” drive sockets are the most practical sockets for most automotive jobs. If you can only pick one drive socket set — you want a ⅜” drive set. However, these still won't let you complete any job. ½” drive socket sets are the largest drive sockets that most mechanics need.

What are 1/4 sockets used for?

1/4 inch - Used for smaller sockets and precision work. Useful for dismantling individual components on the bench. 1/2 inch - 1/2" sockets are generally used for nuts and bolts from around 10mm and up. A 1/2" drive socket can apply enough force to undo all nuts on a car.

Can I use a 3/4 socket instead of a 19mm?

No, there's no need to get a 19mm socket, and it will present no difference in performance just because the number on the side is different.

What SAE socket is close to 19mm?

SAE	Metric	Inch
	18mm	0.709
23/32"		0.719
	19mm	0.748
3/4"		0.75

What size is a 19 mm in standard?

Bolt Diameter	Metric	Standard
1/2"	19mm	3/4"
9/16"	21mm	13/16"
	22mm	7/8"
5/8"	24mm	15/16"

Do I need both 6 and 12 point sockets?

Is this really necessary? Answer: It's true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners.

Can a 6-point socket work for a 12 point nut?

Sockets are commonly made in both 6-point and 12-point styles. For the best fit, choose a 6-point socket for a 6-point fastener and a 12-point socket for a 12-point fastener. Tekton offers sockets in both varieties.