Imperial Sockets Sizes

June 26, 2024 Post a Comment

Imperial sockets sizes

Six Point Standard Sockets (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1)

Are metric and imperial sockets the same?

Metric sockets use imperial-sized drivers and the drive dimensions follow in US sizes, such as 1/4″, 3/8″, 1/2″, ¾. This means you can use the sockets whether it's metric or SAE. Logically, smaller sockets would use smaller drive sizes, and larger sockets use larger drive sizes.

What are the 4 socket drive sizes?

These drive fittings come in four common sizes: 1⁄4 inch, 3⁄8 inch, 1⁄2 inch, and 3⁄4 inch (referred to as "drives", as in " 3⁄8 drive").

What are the standard SAE socket sizes?

Metric and Standard (SAE) sockets come in three available drive sizes: 1/4 inch, 3/8 inch, and 1/2 inch. The measurement refers to the size of the square used to attach the to socket to a wrench or a ratchet.

Are 3/4 and 19mm the same?

19mm = 3/4 inch. 20mm = 25/32 inch. 21mm = just over 13/16 inch. 22mm = almost 7/8 inch.

How do I know what size socket I have?

It's important to note that socket sizes are actually given in two measurements, namely: The size of the drive socket (the part that attaches to the socket wrench). These are always given in imperial measurements, and will usually be either 1/4", 3/8", 1/2", 3/4" or 1".

Do I need metric or imperial socket?

A simple rule is that if the bolt has lines on its head then it's considered imperial. If it's got numbers on the head then it's metric and the higher the number, the stronger the bolt.

Are SAE and imperial the same?

SAE (Society of Automotive Engineers) is generally Imperial Sizes.

What size is 3/8 in MM?

Dimensions — Inches to Metric
0.375”	3/8”	9.53 mm
0.438”	7/16”	11.13 mm
0.500”	1/2”	12.70 mm
0.563”	9/16”	14.30 mm

What are the 4 different types of sockets?

However, some of the commonest options you would find are 36mm sockets and 10mm sockets. Considering the standard sockets, you can find four common types, and they include 3/4 –inch, ½-inch, 3/8-inch, and ¼-inch sockets. Most of these options mentioned above come with bits that would fit Torx screws.

Whats bigger 3/8 or 1/4 socket?

3/8 is expressed as 0.375 as a decimal and 1/4 is expressed as 0.25 in its decimal form. It is clear that the value of 3/8 is more than 1/4. Hence, it is bigger.

How do you tell what size drive my ratchet is?

Drive Hole indicates the size of the drive hole (also referred to as the "driver hole" or "square hole"), which determines the torque size of the driver tool you'll need. For example, you'd use a ½-inch drive socket with a ½-inch drive ratchet. L indicates the overall socket length.

What does SAE socket stand for?

SAE sockets: Society of Automotive Engineers (SAE) sockets are manufactured for work on American-made vehicles. Socket sizes are measured based on imperial system inches and fractions. Some of the commonly used SAE sizes are 3/8 in., 5/8 in., and 11/16 in. sockets.

Does SAE mean standard?

SAE, or standard, is used on most domestic models, while metric applies to foreign or non-domestic vehicles. Socket sets and wrench sets are among the most used tools in cases where size measuring differences are important. Notably, SAE tools are measured in fractions of inches, from 5/32 to 2 ½ inches.

What are the 3 common sizes of ratchets?

Available with different drive sizes — 1/4 inch, 1/2 inch and 3/8 inch — to operate different size sockets. Most operate with a geared drive; those with a higher tooth count let you operate the tool with a smaller swinging motion, which is useful when there's little room to move the handle.

Can I use a 3/4 socket instead of a 19mm?

No, there's no need to get a 19mm socket, and it will present no difference in performance just because the number on the side is different.

What is a 3/4 wrench in metric?

3/4" 29mm. 1-1/8" 32mm. 1-1/4"

What size is a 19 mm in standard?

SAE Size	Metric Size	Inches Decimal
11/16″		0.688
	18mm	0.709
23/32″		0.719
	19mm	0.748

What are the 3 types of sockets?

Three types of sockets are supported:

Stream sockets allow processes to communicate using TCP. A stream socket provides bidirectional, reliable, sequenced, and unduplicated flow of data with no record boundaries.
Datagram sockets allow processes to use UDP to communicate. ...
Raw sockets provide access to ICMP.